Wiring

PIC Home

1.
Stripping length: Okay...Do this right! You NEED about 3/8 inch of wire stripped of insulation. Too much, it might short. Too little, you may never find the break. So please, spend the time to learn to strip!

2.
Making jumpers: Start by stripping off at least twice the insulation you normally would. say, about an inch.

Now trim the insulated wire to the length needed to span the jump.

Slide the remaing insulation to the center of the wire.

Bend the wire in a staple shape.

Trim each end to about 3/8 inch if needed.

PIC Home

Robodyssey and the Robodyssey logo are trademarks of Robodyssey Systems, LLC
PIC is a registered trademark of Microchip Technology Inc. in the U.S. and other countries.
MikroBasic is a registered trademark of mikroElectronika Inc. in the U.S. and other countries.

Home Product Catalog Shopping Cart Resources Links

Code Page Policies Gallery