PROGRAM NAME CREATED VIA NEW PROJECT!!
COPY AND PASTE FROM NEXT LINE DOWN
'***********************************************
Sub Procedure Forward
    PortB = %00000000
    Delay_ms(5)
    PortB = %00101101
    Delay_ms(50)
end sub
'***********************************************
Sub Procedure Reverse
    PortB = %00000000
    Delay_ms(10)
    PortB = %00110011
end sub
'***********************************************
Sub Procedure T_Left
    PortB = %00000000
    Delay_ms(10)
    PortB = %00101011
end sub
'***********************************************
Sub Procedure T_Right
    PortB = %00000000
    Delay_ms(10)
    PortB = %00110101
end sub
'***********************************************
Sub Procedure Halt
    PortB = %00000000
end sub
'***********************************************
Main:
    TrisB = %00000000    ' Configure pins of PortB as output
    TrisA = %00001111    ' Configure some pins of PortA as input(1)
    CMCON = %00000111
mainloop:
    If TestBit(PortA,2) = 0 Then
       Halt
           Delay_ms(1000)
       Reverse
           Delay_ms(1000)
       T_Right
           Delay_ms(1000)
    End If
    
    If TestBit(PortA,3) = 0 Then
       Halt
           Delay_ms(1000)
       Reverse
           Delay_ms(1000)
       T_Left
           Delay_ms(1000)
    End If
    
    Forward
Goto mainloop
End.