Features:

• Convenient Signal & Power Pins
Each I/O Pin has adjacent positive and negative terminals for convenient 3 pin connections. Servo connectors fit perfectly.
• Intergrated 3 amp dual H-Bridge
Drive small DC motors directly off the motherboard
• 5V Regulated Power
Your microcontroller and half of the I/O power pins are connected to a 5V voltage regulator. The remaining half of the pins are connected directly to your power source.
• Serial DB9 Connector
Quickly upload new programs, or debug your code through the serial port with this convenient connector.
• On/Off & Reset Switches
Convenient power switches allow you to turn on or off each separate power source. No need to hold your robot down while up-loading code!
• Split Power Indicators
The Motherboard features two LED’s, one indicates microcontroller operation and regulated 5 volt activation, while the other indicates secondary power supply activation.
• Noise Reducing Capacitors
Avoid signal noise in your projects with filter capacitors on the Motherboard.
• Compact Size
The Robodyssey Advanced Motherboard is very compact. The unassembled board is jut 2.5 x 1.9 inches. Fully assembeld it grows to just 2.8 x 1.9 inches